Seawater Reference Electrodes

Seawater Reference Electrodes from EDI

Seawater Reference Electrode

Description

The Seawater Reference Electrode, Model IP, is a compact, economical, dry-type reference electrode for marine applications. It is 0.840 inch (21.3 cm) diameter which enables the user to cement on any 1/2 inch socket-end PVC pipe or electrical conduit fitting (e.g. male or female conduit thread or couplings) for permanent installation. Examples of this are shown on EDI Drawing IPASY ? 5 in our data sheet where 1/2 inch PVC couplings serve as transition pieces for running the lead wire through conduit or attaching the electrode to a wall. For intermittent use, the Model IP has a blind 1/4?20 NC tapped hole for attaching up to a 5 lb (2 kg) weight. Should more weight than that be necessary, the electrode and the weight should be attached to a separate drop line as shown on EDI Drawing IPASY ? 4. The electrode may be ordered with either a 1/4 – 20-NC stud end or #18AWG test lead wire. An optional copper sleeve is available which prevents excessive biofouling during extended exposures in seawater.

For Polluted or Brackish Seawater

The Model IP is intended for use in clean full strength seawater. The EDI Model IR-AGG Immersion Reference will give better service in polluted seawater or brackish seawater where the salinity varies with the tidal cycle.

For More Information

Complete Product Information and Installation Instructions are available for downloading as pdf files. Click on the link below to download.

Immersion Reference Electrode (Model IR ) data sheet.

Seawater Reference Electrodes

Seawater Reference Electrodes

Learn About Our Services

Learn about our

pipeline integrity

Services

Learn about our

cathodic protection

Engineering Services

Learn about our

A/C Mitigation

Engineering Services

Learn about our

field services

Learn about our

surveying services