Selected:

AccuRef 30 Copper Sulfate Permanent Electrodes

AccuRef 30 Copper Sulfate Permanent Electrodes

MCM electrode

Standard AccuRef 30

MCM electrode
Permanent electrode suitable for use directly in native soil back fill.

AccuRef 30 with Integrated Coupon

Electrode with Integrated Coupon, Splice-able Electrode
AccuRef 30 Copper/Copper Sulfate Permanent Electrodes

Permanent Electrode Features and Benefits

  • Electrodes are buried directly with native soil backfill - no need for composite backfills. Note: These products are suitable for use in neutral soil having a chloride ion content <500ppm.
  • Low freezing point of -20°C allows electrodes to experience a deep frost without freezing and cracking.
  • Design life of 30 years. (See Important Notes below)
  • High Purity Materials: Copper rod and copper sulfate crystals
  • Moisture absorbent ceramic tip
  • Will not dry out at low humidity and/or high heat
  • Large electrical contact area (electrically active surface area) having hygroscopic characteristics promotes good electrode-to-soil electrical contact. (Note: Soil moisture content is a requirement for a buried metallic structure potential reading versus any permanently installed reference electrode, which means that readings in ultra-dry soil are not possible)

Specifications

  • Sealed cable type/length (standard): 25 feet (7.62 m) of #12 AWG stranded copper wire coated with XLP (USE-2/RHH/RHW-2) insulation; 600V rating, 194°F (90°C) max. temp. in wet & dry environments
  • Active electrical contact surface area: Approximately 16.4 inches² (105.8 cm²) of cylindrical surface, 1.5" in diameter and 3.5" in length)
  • Half-cell materials: 80 grams of 99.99% copper and 500mL of saturated copper sulfate gel electrolyte
  • Max. diameter: 2.77 inches (7.04 cm)
  • Overall length (not including sealed cable): 15.0 inches (38.1 cm)
  • Weight (including sealed cable): 3.9 pounds (1.77 kg)

Important Notes

  • These products must be installed according to the installation instructions provided.
  • These products are not guaranteed to maintain their calibration in all soil environments and it is incumbent on the customer to test their soil for the presence of any potential chemical contaminants prior to installation of these products. The M. C. Miller Company has not tested these products with regard to the effects of specific (potential) chemical contaminants on their calibration.
  • These products are not designed for submersion applications.

AccuRef 30 Splice-able Electrode

Permanent electrode suitable for use directly in native soil back fill.
All hardware components included for onsite cable splicing

Splice-able Cable

MC Miller Accuref Spliceable Copper Sulfate Electrode
Any customer-supplied cable can be used having a maximum outside diameter of 0.4" (10mm) and a maximum wire size of #8 AWG

Ceramic Tip

MC Miller Ceramic Tip
Moisture absorbent ceramic tip has a large electrical contact area of approximately 16.4 sq in (approx. 100 sq. cm)

AccuRef 30 with Integrated Coupon

Electrode with Integrated Coupon, Splice-able Electrode
AccuRef 30 Copper/Copper Sulfate Permanent Electrodes

AccuRef 30 CuSO4 Permanent Electrode with Integrated Coupon Features

  • Integrated coupon/holder assembly
  • Integrated PVC Pipe Adapter for optimal PVC pipe connection (nominal 3 inch diameter pipe)
  • Carbon Steel coupon (AISI 1018, ASTM A108, AMS5069) with 10 cm2 surface area
  • #12 AWG (4 mm2) standard copper wire, green colored THHN insulation, single wire, 25 feet (7.62 m) long for coupon connection. Longer lengths of wire are available

Standard AccuRef 30

MCM electrode
Permanent electrode suitable for use directly in native soil back fill.

AccuRef 30 with Integrated Coupon

Electrode with Integrated Coupon, Splice-able Electrode
AccuRef 30 Copper/Copper Sulfate Permanent Electrodes

AccuRef 30 Splice-able Electrode

Permanent electrode suitable for use directly in native soil back fill.
All hardware components included for onsite cable splicing

Splice-able Cable

MC Miller Accuref Spliceable Copper Sulfate Electrode
Any customer-supplied cable can be used having a maximum outside diameter of 0.4" (10mm) and a maximum wire size of #8 AWG

Ceramic Tip

MC Miller Ceramic Tip
Moisture absorbent ceramic tip has a large electrical contact area of approximately 16.4 sq in (approx. 100 sq. cm)

AccuRef 30 Copper Sulfate Permanent Electrodes

MCM electrode
Clear

Required Information for RFQ:

Additional information

WeightN/A
DimensionsN/A
Type

Standard, with Integrated Coupon, Splice-able

Share on facebook
Share on linkedin

Additional information

WeightN/A
DimensionsN/A
Type

Standard, with Integrated Coupon, Splice-able

Share on facebook
Share on linkedin
Close Menu
×

Cart

Your Browser is Outdated

Older browsers may not support all the features used on this website. Please consider updating your browser for more security, speed and the best experience on this site.

Didn't find what you were looking for?

Help us improve the site for future visitors. Click on the reason you’re leaving.