ZERIOS CONFORMAL COATING
Description
ZERIOL FVS
Zerios Conformal Coating employs an easily detectable UV dye that glows under black light (365 nm) to visually verify thorough coverage of all areas. RoHS compliant.
Regulatory Compliance
Toluene-free and compatible with most circuit board stock (test plastic components before use) and meets MIR guidelines for the Federal Government as well as the State of California.
Regulatory Compliance
FLAMMABLE: Do not use around flames or other ignition sources. Use in well ventilated areas. Store containers in dry, well ventilated area from 50-100F and away from direct sunlight. Consult Safety Data Sheet (SDS) for further information.
Availability
Available in 12 oz. aerosol cans (12 cans/case – bulk available upon request).
Storage
Shelf life: 24 months
Store containers in dry, well ventilated area from 50-100F and away from direct sunlight.
Surface Preparation
Prepare surfaces to be coated by removing all dirt, grease/oil and other contaminants. Protect adjacent areas by masking and/or drop cloth.
Application
Apply at; 45°-90°F., < 85% relative humidity and at a dew point spread >5°F. Shake can for two minutes after metal ball within begins to rattle. Repeat periodically throughout use. Spray 8-12” from surface in an even sweeping motion, overlap successive passes and release button at the end of each stroke. Avoid drips and runs by applying in multiple coats rather than one heavy coat. Clear spray tip after use, by holding can upside down and spraying until only gas is expelled.
Recommended Product Applications & Guidelines
Recommended applications for Zerios Conformal Coating include, but are not limited to, the following:
- Printed Circuit Boards (PCB)
- Radio Parts
- Electrical Components
- Internal Computer Parts
Physical Properties
You must be logged in to post a review.
Reviews
There are no reviews yet.