Pipehorn Pipe and Cable Locator 800 Series


Pipehorn Pipe and Cable Locator Series 800

The best high-frequency pipe & cable locator in the industry

  • Significantly more capable
  • Easy to learn and operate
  • More rugged than ever before


  • Frequencies: 480 kHz and 9 kHz (model dependant)
  • Modes: Inductive & Conductive
  • Battery: 8 “C” alkaline batteries
  • On/Off indicator
  • Battery Life Indicator
  • Good Signal Indicator


  • Output: Signal strength meter and audible, built in speaker
  • Gain: Smart Control™: (semi-automatic)
  • Battery: Two 9-volt
  • Weight: 3.4 lbs. (1.5 kg)

Standard Accessories

  • Conductive Cables
  • Extension Sweep Handle
  • Ground Rod
  • Padded Carrying Bag


  • Two models available! – A single high-frequency unit (480 kHz) and a dual frequency unit with both 480 kHz and 9 kHz for all of your locating needs.
  • Superior high frequency (480 kHz) performance. Pipehorn is the best tool in the industry when direct connect is not possible, and on the toughest conductors: coated iron pipes with insulated joints, unenergized power (street/parking lot lights), worn-out tracer tape & wire, short side services & stub-outs, concentric neutrals, and fiber. Nothing sweeps areas for un-marked utilities like a Pipehorn.
  • Simultaneous conductive transmission of both high (480 kHz) and low (9 kHz) frequencies for congested areas and for long distance locates (800-HL). Check either signal with the flick of a switch.
  • No air broadcast on high frequency conduction. Better signals on the worst conductors.
  • Fast-response signal strength meter and sharp audio tone for precise pinpointing
  • Watertight reinforced receiver wand. More durable than ever.
  • All weather / high impact ABS housing on transmitter. Audio tone indicates battery strength and good connection. Low profile (will not tip over). Bright yellow (easier to see).
  • Lightweight, space saving carry bag.
  • Total Shipping Weight: 18 lbs.

Pipehorn Pipe and Cable Locator Series 800