DeFelsko Standards Non-Certified Plastic Shims

Description

Non-Certified Plastic Shims
Non-Certified Plastic Shims (foils) provide a quick operational check of the instrument and they allow the user to perform practice measurements when placed over metal. They are not suitable for use with magnetic pull-off gages.
DeFelsko Standards Non-Certified Plastic Shims Overview of Shims

  • Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods
  • For use with all Type 2, electronic coating thickness gages
  • Protects the probe from damage or premature wear when placed over hot or abrasive surfaces
  • Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film

Non-Certified Plastic Shims

  • Provide a quick operational check of the instrument by allowing the user to perform practice measurements
  • Can be used to protect the probe when measuring on tacky, rough or hot surfaces
  • Labeled in both Metric and Imperial units
  • Available as a set of 5 (below)
Non-Certified Plastic Shims Specifications
Approximate
Thickness
Color Accuracy
25 μm (1 mil) Orange ± 20%
50 μm (2 mil) Red ± 10%
125 μm (5 mil) Blue ± 5%
250 μm (10 mil) Brown ± 5%
500 μm (20 mil) Yellow ± 5%

A package of 5 non-certified shims is included with all DeFelsko electronic coating thickness gages (Type 2).

Note: While DeFelsko inspects non-certified plastic shims to ensure they are within the nominal stated accuracy, they are not traceable to any national or international standard.

Reviews

There are no reviews yet.

Be the first to review “DeFelsko Standards Non-Certified Plastic Shims”