DeFelsko Standards Certified Polystyrene Blocks
Certified Polystyrene Blocks
Certified Polystyrene Blocks are for use with gages that measure over 1500 μm (60 mils).They have an accuracy of:
± (2.5 ?m + 0.05% of thickness)
± (0.1 mil + 0.05% of thickness)
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Order Code |
Ideal for | Approximate Thickness | Coating Substrate |
Accuracy | |||
---|---|---|---|---|---|---|---|
Plate 1 | Plate 2 | Plate 3 | Plate 4 | ||||
P1 | PosiTector® 6000 FT, FTS, NTS, FNTS |
375 μm 15 mils |
2 mm 2 mils |
4.5 mm 185 mils |
6.5 mm 250 mils |
Polystyrene Blocks |
± 2.5 μm + 0.05% of thickness |
P2 | PosiTector® 6000 FHS, NHS, EOC |
2.5 mm 100 mils |
6.5 mm 250 mils |
13 mm 500 mils |
19 mm 750 mils |
||
P3 | PosiTector® 100 C | 375 μm 15 mils |
1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
||
P4 | PosiTector® 100 D | 1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
6.5 mm 250 mils |
||
P5 | PosiTector® 6000 FKS, NKS | 1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
12 mm 480 mils |
||
P6 | PosiTector® 200 C | 375 μm 15 mils |
1.5 mm 60 mils |
2.5 mm 100 mils |
3 mm 125 mils |
||
Select the Standard that most closely matches the measuring range of your gage. All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB. Polystyrene Block Dimensions: 38 X 70 mm (1.5 X 2.75 inch) |
DeFelsko Standards Certified Polystyrene Blocks
DeFelsko Standards Certified Polystyrene Blocks
