PSI WS Steel Sleeves

PSI WS Steel Sleeves

Model WS Steel Wall Sleeves are an excellent choice for installations where the Link-Seal? Modular Seal and WS sleeve assembly would be subject to extremely high temperatures or where fire seals are specified.

PSI WS Steel Sleeves

Descriptions, Features, and Benefits
Model WS Wall Sleeves Model WS Intermediate Sleeves Model WS Split Sleeves
WS Wall Sleeve WS Intermediate Sleeve WS Split Sleeve
Model WS Steel Wall Sleeves are an excellent choice for installations where the Link-Seal? Modular Seal and WS sleeve assembly would be subject to extremely high temperatures or where fire seals are specified. WS Intermediate Sleeves are used in conjunction with Link-Seal® Modular Seals to seal all pipes passing through concrete or masonary structures that require two belts of seals to fill the annular space between pipe and wall. Model WS Split Sleeves are used for installations where an existing pipe run needs to penetrate a wall yet to be constructed. During wall installation a split sleeve is welded around the existing pipe and positioned in the form to center the pipe. After installation a Link-Seal® Modular Seal is used to seal the annular space between split sleeve and pipe.
  • Available from 2.07″ (52.6mm) to 23.25″ (59.1mm) Inside Diameters.
  • 2″ (50.8mm) Water Stop Collar with continuous weld-bead on both sides.
  • Primed inside and out with Rust-O-Leum red primer #5268 or approved equivalent.
  • May be order to any length.
  • Special order diameters and schedule pipe available on request.
  • Available from 2.07 (52.6mm) to 29.25 (74.3cm) Inside Diameters.
  • Standard wall thickness is 0.375″.
  • Primed inside and out with Rust-O-Leum red primer #5268 or approved equivalent.
  • May be order to any length.
  • Special order diameters and schedule pipe available on request.
  • Available from 2.07 (52.6mm) to 29.25 (74.3cm) Inside Diameters.
  • Standard wall thickness = Schedule 40 for up to 10″?
  • Standard wall thickness = 0.375″ for 12″? and above.
  • Two 2″ water stop collars for added structural stability.
  • Primed inside and out with Rust-O-Leum red primer #5268 or approved equivalent.
  • May be order to any length.
  • Special order diameters and schedule pipe available on request.
MODEL WS STEEL SLEEVES
(12″ length)
MODEL I.D. lbs. Kg.
WS-2-15-S-12 2.07 5.53 2.51
WS-2-1/2-20-S-12 2.47 7.91 3.58
WS-3-21-S-12 3.07 9.93 4.51
WS-3-1/2-22-S-12 3.55 11.70 5.31
WS-4-23-S-12 4.03 13.61 6.17
WS-5-25-S-12 5.05 17.91 8.12
WS-6-28-S-12 6.07 22.73 10.31
ws-6-18-S-12 6.25 14.82 6.72
WS-8-32-S-12 7.98 33.55 15.22
ws-8-18-S-12 8.25 21.94 9.95
WS-10-36-S-12 10.02 46.12 20.92
ws-10-25-S-12 10.25 33.67 15.27
WS-12-37-S-12 12.00 60.14 27.28
WS-14-37-S-12 13.25 62.04 28.14
WS-16-37-S-12 15.25 71.04 32.22
WS-18-37-S-12 17.25 79.98 36.28
WS-20-37-S-12 19.25 90.00 40.82
WS-22-37-S-12 21.25 98.00 44.45
WS-24-37-S-12 23.25 107.00 48.53
Note: WS sizes through 10″ are schedule 40.
WS sizes 12″ and up have a standard
0.375″ wall thickness.
ws rolled sleeves (6″ and 8″) = 0.1875 wall
thickness; (10″) = 0.25″ wall thickness.
MODEL WS INTERMEDIATE SLEEVES
(6″ length)
MODEL I.D. lbs. Kg.
WS-2-15-S-6NW 2.07 1.83 0.83
WS-2-1/2-27-S-6NW 2.47 2.90 1.31
WS-3-21-S-6NW 3.07 3.79 1.72
WS-3-1/2-22-S-6NW 3.55 4.55 2.07
WS-4-23-S-6NW 4.03 5.40 2.45
WS-5-25-S-6NW 5.05 7.31 3.32
WS-6-28-S-6NW 6.07 9.49 4.30
WS-8-32-S-6NW 7.98 14.28 6.48
WS-10-36-S-6NW 10.02 20.24 9.18
WS-12-37-S-6NW 12.00 24.78 11.24
WS-14-37-S-6NW 13.25 27.29 12.38
WS-16-37-S-6NW 15.25 31.29 14.20
WS-18-37-S-6NW 17.25 35.30 16.01
WS-20-37-S-6NW 19.25 39.30 17.83
WS-22-37-S-6NW 21.25 43.30 19.64
WS-24-37-S-6NW 23.25 47.31 21.47
WS-26-37-S-6NW 25.25 51.30 23.28
WS-28-37-S-6NW 27.25 55.30 25.09
WS-30-37-S-6NW 29.25 59.30 26.91
Note: Intermediate sleeves are 6″ in length,
with no welded water-stop collar.
NW = No Water-Stop Collar
Model WS Split Sleeves
(12″ length)
MODEL I.D.
WS-2-15-S-12DWS 2.07
WS-2-1/2-27-S-12DWS 2.47
WS-3-21-S-12DWS 3.07
WS-3-1/2-22-S-12DWS 3.55
WS-4-23-S-12DWS 4.03
WS-5-25-S-12DWS 5.05
WS-6-28-S-12DWS 6.07
WS-8-32-S-12DWS 7.98
WS-10-36-S-12DWS 10.02
WS-12-37-S-12DWS 12.00
WS-14-37-S-12DWS 13.25
WS-16-37-S-12DWS 15.25
WS-18-37-S-12DWS 17.25
WS-20-37-S-12DWS 19.25
WS-22-37-S-12DWS 21.25
WS-24-37-S-12DWS 23.25
WS-26-37-S-12DWS 25.25
WS-28-37-S-12DWS 27.25
WS-30-37-S-12DWS 29.25
Note: Items are made to order and
may not be returned or exchanged.
Model WS Split Sleeves furnished Galvanized
shall be galvanized after all welding,
cutting and cleaning has been completed.
E Measurement must always be 1/8″
for welding purposes.
Model Number DWS is
Double Water-Stop Split Sleeve.

PSI WS Steel Sleeves

PSI WS Steel Sleeves

Additional information

SKU PSI-WS-SS Categories , , , Tags , , ,

Other Similar Products

Related products

Learn About Our Services

Learn about our

pipeline integrity

Services

Learn about our

cathodic protection

Engineering Services

Learn about our

A/C Mitigation

Engineering Services

Learn about our

field services

Learn about our

surveying services

Additional information

SKU PSI-WS-SS Categories , , , Tags , , ,