PSI Flat Isolating Rubber Faced Gasket

PSI Flat Isolating Rubber Faced Gasket

Rubber Faced Flat Isolating Gasket Seal

Description

Rubber faced flat gaskets are used in special applications where PSI LineBacker® or GasketSeal® gaskets may not be suitable.

Please contact an Allied Corrrosion representative for additional information on available options.

How to Order

To order Rubber Faced Phenolic Isolating Gaskets please indicate the following:

  1. Quantity
  2. Nominal Pipe Size
  3. Pressure Rating
  4. Gasket Type: E or F
  5. Weld neck or slip-on application
  6. Note all special requirements.

Benefits, Features, Sizes, and Ratings

Benefits and Features

Flat gaskets used in special applications such as elevated temperatures often require materials such as Red Devil or Yellow Jacket. Please contact an Allied Corrosion Industries representative for additional information on available options.

  • Highest Grade Phenolic for Electrical Isolation.
  • Standard Material is 1/8″ Thick.
  • Custom Order to 1/4″ Thick.
  • Usable with most types of flanges.
  • Nitrile or Neoprene facing available.

Sizes

  • Nitrile Faced – All standard ANSI flange sizes from 1/2″ to 48″.
  • Neoprene Faced – All standard ANSI class to 72″ O.D.
  • Custom – odd sizes and shapes available on special order.

Pressure Ratings

  • All ANSI and API rated flanges.

Rubber Faced Flat Isolating Gasket Seal

Typical Specifications

For Natural Gas/Aqueous Fluids

Materials for sealing gaskets on pipes containing aqueous fluids or natural gas [up to 175°F. (79°C.)] shall consist of the following components:

Isolating and Sealing Gasket
One full faced isolating and sealing gasket, PSI Nitrile Faced Phenolic Type “E”, 1/8″ thick. The phenolic shall have a 500 volts/mil. dielectric strength and a minimum 25,000 psi compressive strength.

The full faced flange isolating gasket shall be 1/8″ less in I.D. than the I.D. of the flange in which it is installed.

Quality
Gaskets shall be manufactured at a facility that has a registered ISO 9001:2000 Quality Management System. Submittals shall include a copy of valid registration.

Availability
Gaskets shall be manufactured by Pipeline Seal and Insulator, Inc., Houston, Texas, U.S.A.,
Telephone: 713-747-6948
Facsimile: 713-747-6029
www.pipelineseal.com.
e-mail: info@psipsi.com

Performance suitability and material compatibility shall be determined by the user.

For Water/Wastewater

Materials for flange isolation kits on water and/or sewer lines [up to 175 degrees F. (79 degrees C.)] shall consist of the following components:

Isolating and Sealing Gasket
One full faced isolating and sealing gasket, PSI Neoprene Faced Phenolic, Type “E”, 1/8″ thick.

The full faced flange isolating gasket shall be 1/8″ less in I.D. than the I.D. of the flange in which it is installed.

Quality
Gaskets shall be manufactured at a facility that has a registered ISO 9001:2000 Quality Management System. Submittals shall include a copy of valid registration.

Availability
Gaskets shall be manufactured by Pipeline Seal and Insulator, Inc., Houston, Texas, U.S.A.,
Telephone: 713-747-6948
Facsimile: 713-747-6029
www.pipelineseal.com.
e-mail: info@psipsi.com

Performance suitability and material compatibility shall be determined by the user.

Flat Isolating Gaskets

Flat isolating gaskets are available in a wide variety of dielectric materials to eliminate the possibility of electrical currents passing through the flange. For additional protection, type “E” gaskets extend out to the O.D. of the flange to help eliminate the possibility of any metallic materials inadvertently becoming lodged between the flange faces and thus shoring-out the desired electrical isolation.

PSI Flat Isolating Rubber Faced Gasket

PSI Flat Isolating Rubber Faced Gasket

Learn About Our Services

Learn about our

pipeline integrity

Services

Learn about our

cathodic protection

Engineering Services

Learn about our

A/C Mitigation

Engineering Services

Learn about our

field services

Learn about our

surveying services