Non-Conductive Pipe Rollers – Type H

Non-Conductive Pipe Rollers

Non-Conductive Pipe Roller

Non Conductive Pipe Rollers prevent the passing of current from the pipeline to bridge structure and rebars. As a direct replacement for a cast iron roll, non-conductive pipe rollers are made of the highest specification polyurethane compound which is cast around an integral steel sleeve to form a full length bearing for the axle.
They can be used in conjunction with the FRP Type # 240 Roll-On Shields™.

Advantages

  • Maintain same support strength of pipe hanger system.
  • Eliminate chafing and rusting pipe caused by iron rolls.
  • Eliminate electrical grounding of the pipeline to the bridge.
  • Eliminate insulating joints at each end of the bridge, and include the suspended line as part of the cathodically protected pipeline maintaining continuity of cathodic protection.
  • Absorb vibration from traffic or other sources, saving wear and tear on pipe hanger parts.

For use with

  • Single Pipe Roll
  • Adjustable Roll Support
  • Adjustable Roll Guide
  • Adjustable Roll Hanger
  • Spring Cushion Hanger
  • Roller Chair
  • Clevis Insulator

TYPE H NON-CONDUCTIVE PIPE ROLLERS

Type H dimension drawing

Dimensions for Type H
LBA Item
Number
Model
Number
Pipe
Size
A
C D E F
NCR0200 2H 2 2 5/8 1 1/4 13/16 3/8
NCR0300 3H 3 3 3/4 1 5/8 7/8 1/2
NCR0400 4H 4 4 3/4 2 1 1/2 1/2
NCR0500 5H 5 5 13/16 2 3/8 1 1/2 5/8
NCR0600 6H 6 6 7/8 2 3/4 1 3/4 3/4
NCR0800 8H 8 8 7/8 3 1/8 2 1/8 7/8
NCR1000 10H 10 11 3 5/8 2 1/8 7/8
NCR1200 12H 12 12 1/2 4 2 1/8 1
NCR1400 14H 14 14 1/4 4 1/2 2 1/2 1 1/8
NCR1600 16H 16 16 1/4 5 2 5/8 1 1/4
NCR1800 18H 18 18 3/8 5 9/16 2 3/4 1 1/4
NCR2000 20H 20 20 1/4 5 3/4 3 1/2 1 1/4
NCR2400 24H 24 24 1/4 7 1/16 4 1/8 1 1/2
Column headings refer to drawing above.

TYPE S NON-CONDUCTIVE PIPE ROLLERS

Type S dimension drawing

For use with

  • Pipe Roller Stand
  • Adjustable Pipe Roller Stand

Dimensions for Type S
LBA Item
Number
Model
Number
Pipe
Size
A
C D E F
NCS0200 2S 2 2 5/8 2 13/16 1/2
NCS0300 3S 3 2 5/8 2 1/8 1 1/8 1/2
NCS0400 4S 4 3 3/4 2 9/16 1 1/8 1/2
NCS0500 5S 5 3 3/4 2 3/8 1 1/8 1/2
NCS0600 6S 6 3 3/4 2 1 1/8 1/2
NCS0800 8S 8 6 3 3/8 1 3/8 3/4
NCS1000 10S 10 6 3 1/8 1 5/8 3/4
NCS1200 12S 12 8 3 7/8 2 3/4 7/8
NCS1400 14S 14 9 1/8 4 2 3/4 7/8
NCS1600 16S 16 9 3 7/8 1 3/4 1 1/8
NCS1800 18S 18 9 4 1 15/16 1 1/8
NCS2000 20S 20 9 4 1 7/8 1 1/8
NCS2400 24S 24 10 4 7/16 2 1/4 1 1/4
Column headings refer to drawing above.

Physical Properties List

Below are the key properties of the casting compound used in the non-conductive pipe rollers.

A roller that has cold flowed under the load placed upon it (time, temperature, and weight) will develop a flat spot and cease to roll. A bound roller will pull the whole support system out of alignment, resulting in metal fatigue and ultimately failure.

Custom Compounded Polyether Type Polyurethane
Hardness, Shore A 98
Tensile Modulus, psi at 100% 2542
Tensile Strength, psi 6764
Elongation, percent 247
Die C Tear, pli 477
Split Tear, pli 130
Compressions Set, Method B, percent 21
Bashore Resilience, percent 39
Compression Modulus psi at 5% 500
Compression Modulus psi at 105% 850
Compression Modulus psi at 15% 1175
Compression Modulus psi at 20% 1600
Compression Modulus psi at 25% 2125

Non-Conductive Pipe Rollers – Type H

Non-Conductive Pipe Rollers – Type H

Additional information

Model

2H, 3H, 4H, 5H, 6H, 8H, 10H, 12H, 14H, 16H, 18H, 20H, 24H

Learn About Our Services

Learn about our

pipeline integrity

Services

Learn about our

cathodic protection

Engineering Services

Learn about our

A/C Mitigation

Engineering Services

Learn about our

field services

Learn about our

surveying services

Additional information

Model

2H, 3H, 4H, 5H, 6H, 8H, 10H, 12H, 14H, 16H, 18H, 20H, 24H