Product was successfully added to quote request.View List
DeFelsko Standards Certified Polystyrene Blocks
Certified Polystyrene Blocks
Certified Polystyrene Blocks are for use with gages that measure over 1500 μm (60 mils).They have an accuracy of:
± (2.5 ?m + 0.05% of thickness)
± (0.1 mil + 0.05% of thickness)
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
Order Code |
Ideal for | Approximate Thickness | Coating Substrate |
Accuracy | |||
---|---|---|---|---|---|---|---|
Plate 1 | Plate 2 | Plate 3 | Plate 4 | ||||
P1 | PosiTector® 6000 FT, FTS, NTS, FNTS |
375 μm 15 mils |
2 mm 2 mils |
4.5 mm 185 mils |
6.5 mm 250 mils |
Polystyrene Blocks |
± 2.5 μm + 0.05% of thickness |
P2 | PosiTector® 6000 FHS, NHS, EOC |
2.5 mm 100 mils |
6.5 mm 250 mils |
13 mm 500 mils |
19 mm 750 mils |
||
P3 | PosiTector® 100 C | 375 μm 15 mils |
1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
||
P4 | PosiTector® 100 D | 1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
6.5 mm 250 mils |
||
P5 | PosiTector® 6000 FKS, NKS | 1.5 mm 60 mils |
2.5 mm 100 mils |
4.5 mm 185 mils |
12 mm 480 mils |
||
P6 | PosiTector® 200 C | 375 μm 15 mils |
1.5 mm 60 mils |
2.5 mm 100 mils |
3 mm 125 mils |
||
Select the Standard that most closely matches the measuring range of your gage. All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB. Polystyrene Block Dimensions: 38 X 70 mm (1.5 X 2.75 inch) |