DeFelsko Standards Certified Coated Metal Plates

Description

Certified Coated Metal Plates

Certified Coated Metal Plates are the best solution for verifying the calibration, accuracy and operation of most magnetic, eddy current or ultrasonic coating thickness gages including magnetic pull-off gages as well as many competitive models. They fulfill both ISO and in-house quality control requirements. At ± 0.43 μm (± 0.017 mil) Certified Coated Metal Plates are DeFelsko’s most accurate solution.

DeFelsko Standards Coated Metal Plates

Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

  • Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
  • Ideal for use in the calibration lab, in the field or on the factory floor
  • Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
  • Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
  • Individually serialized for traceability to NIST or PTB – includes a Certificate of Calibration
  • Certified and labeled in both Metric and Imperial units

Coated Metal Plates Specifications

Order
Code
Ideal for Approximate Thickness Coating
Substrate
Accuracy
Plate 1 Plate 2 Plate 3 Plate 4
S1 PosiTector® 6000
F, FS, FRS, FN, FNS, FNRS
PosiTestۏ F & FM
0 75 μm
3 mils
250 μm
10 mils
1500 μm
60 mils
Epoxy
on steel
(Ferrous)
± 0.43 μm
± 0.017 mils
S2 PosiTector® 6000 F0S, F45S, F90S
PosiTest® DFT Ferrous & Combo
0 75 μm
3 mils
250 μm
10 mils
1000 μm
40 mils
S3 PosiTest® G & GM
PosiPen® A, B & C
0 15 μm
0.6 mils
40 μm
1.6 mils
100 μm
4 mils
A1 PosiTector® 6000
N ,NS, NRS, FN, FNS, FNRS
0 75 μm
3 mils
250 μm
10 mils
1500 μm
60 mils
Epoxy
on Aluminum
(Non-Ferrous
± 0.43 μm
± 0.017 mil
A2 PosiTector® 6000
NAS , N0S, N45S, N90S
PosiTest® DFT Combo
0 75 μm
3 mils
250 μm
10 mils
500 μm
20 mils
A3 PosiTector® 100B, 200, 200B 75 μm
3 mils
125 μm
5 mils
250 μm
10 mils
500 μm
20 mils
Select the Standard that most closely matches the measuring range of your gage.
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5 inch) Measurement Diameter: 25 mm (1 inch)

Reviews

There are no reviews yet.

Be the first to review “DeFelsko Standards Certified Coated Metal Plates”