Selected:

Below Ground Insulator Tester

Product Information for:

Below Ground Insulator Tester

Below Ground Insulator Tester

Model CE-IT

Tinker & Rasor’s’ CE-IT is an ideal instrument for the fast and accurate testing, of below ground insulators and road crossing casings. This fully automatic unit tests the insulator without any adjustment by the operator.

The Model CE-IT Insulator Tester is fully automatic and highly sensitive electronic instrument designed to test the effectiveness of buried pipeline insulators. The CE-IT can also be used to determine isolation condition of pipelines in road crossing casings.

The Model CE-IT circuit automatically adjust to the voltage polarity present on the underground piping system under test. A read out of the test results are displayed in English on the LCD meter. The entire testing procedure is complete in less than 30 second and audible signal alerts the operator when test cycle is completed. Although the Model CE-IT is equipped with power start switch, to conserve batteries the instrument will automatically shut off in 10 minutes if not in use.

Features

  • Senses external polarity
  • Matches external polarity
  • Sense external voltage
  • Matches internal voltage reference with external voltage
  • Sends charging voltage
  • Senses flowing current throughout the testing cycle
  • Gives result of test considering the above tested parameters
  • Expected battery life exceeds 50 hours

Tinker & Rasor Insulator Testor Model CE-IT

Additional information

Share on facebook
Share on linkedin
Close Menu
×

Cart

Didn't find what you were looking for?

Help us improve the site for future visitors. Click on the reason you’re leaving.