PSI Model PE Casing Spacers

PSI Model PE Casing spacers/isolators are manufactured from high density (linear), injection molded polyethylene to provide positive insulation, high abrasion resistance and low coefficient of friction.

PSI Model PE Non-Metallic Casing Spacers/Isolators

Model PE Description

Model PE Casing Isolators are designed primarily for smaller diameter steel or polyethylene carrier pipes (ANSI O.D. pipe without a bell or mechanical joint). We do not recommend that they be used on any carrier pipe over 24″ in diameter or for installations over 300 feet long without consulting with PSI. PE Isolators should not be used on concrete carrier pipe.

High density (linear), injection molded virgin polyethylene casing isolators/spacers provide positive insulation, high abrasion resistance and low coefficient of friction for a wide variety of double containment carrier/casing pipe applications. They are extremely light in weight and easy to handle during installation.

A ribbed inner surface prevents slippage and guards against carrier pipe coating damage while the outer surface may include any one of several molded runners to accommodate 2″ (50.8mm) x 4″ (101.6mm) or larger carrier/casing differentials.

One piece solid molded segments provide for maximum load bearing. Hardware includes cadmium plated steel studs, nuts and washers. A screwdriver is the only tool needed for installation.

Casing Spacer Model PE

Targeted Use

Energy

  • For carrier pipe diameters (Nominal Steel & IPS) ranging from 3/4″ (19.1mm) to 48″ (121.92cm).
  • For carrier pipe insertion lengths up to 1,000 feet.*
  • Spacing Recommendation: Max 8′ (243.8cm) between spacers, Max 2′ (61.0cm) from casing pipe end.
  • Recommended End Seals: Model C, S, W, R, and FW

Model PE Casing Isolators are designed primarily for smaller diameter steel or polyethylene carrier pipes (ANSI O.D. pipe without a bell or mechanical joint). We do not recommend that they be used on any carrier pipe over 24″ in diameter or for installations over 300 feet long without consulting with PSI. PE Isolators should not be used on concrete carrier pipe.

Benefits and Features

  • 5″ (127mm) wide band for maximum hoop strength around carrier pipe.
  • Ribbed inner surface prevents slippage and guards against coating damage.
  • Molded from virgin polyethylene material.
  • Lightweight for ease of handling and installation.
  • Screwdriver is only tool needed for installation.
  • Model available with non-metallic hardware.
  • High-temp model available (up to 12″ [305mm]) for service temperatures to 280°F (138°C).
  • Eliminates the Need for Blown Sand or Pea Gravel

Typical Application for Model PE Casing Spacers

psi casing spacer typical application

Typical Installation

Based on 20 ft. (6.0 meters) carrier pipe segments in a casing of not more than 300 ft. (91.5 meters). Consult Allied Corrosion for longer casings and for concrete pipe.

Recommended Maximum Spacing

All Model PE Isolator/Spacers should not exceed 5 ft. (1.5 meters) to 8 ft.(2.4 meters) center-to-center. An isolator/spacer should be placed within 2 ft.(0.6 meters) on each side of a coupling or joint and within 1 ft.(0.3 meters) of each end of the casing.

Material Specifications for PSI Model PE Casing Spacers and Isolators

SPECIFICATION ASTM TEST VALUE
Material Injection Molded Virgin Polyethylene
Tensile
Strength
D638, D651 3,100 – 5,500 psi
(218 – 387 kg/cm2)
Compressive
Strength
D693 3,200 psi
(225kg/cm2)
Water
Absorption
D570 0.1%
Temperature 180°F. Max. (82°C.)
Impact
Strength
D256 1.5 – 2.0 ft lb/in.
(0.8 – 1.07 newton-meter/cm)
Dielectric
Strength
D149 450 Volts/Mil.
Color Natural

Liner – none

Runners

3/4″ (19mm) through 12″ (305mm) = 2-piece with molded-in runners.

14″ (356mm) and larger = Muliple segments with molded-in runners.

Hardware

Metallic – Bolts and Square Nuts are plated steel.

Non-Metallic – Bolts and Nuts are high temperature plastic.

Casing Spacer Model PE

Model PE Casing Spacer
Band Width and Runner Height

Casing Spacer Model PE

Model Size Band Width Runner Height
3/4 × 2 3.0″ (76.19mm) 5/16 (7.94mm)
1 × 3 3.0″ (76.19mm) 1/2″ (12.7mm)
1 1/4 × 3 3.0″ (76.19mm) 1/2″ (12.7mm)
1 1/2 × 3 3.0″ (76.19mm) 1/2″ (12.7mm)
2 × 4 4.0″ (101.6mm) 5/8″ (15.88mm)
2 1/2 × 5 4.0″ (101.6mm) 5/8″ (15.88mm)
3 × 6 4.0″ (101.6mm) 5/8″ (15.88mm)
4 × 6 4.0″ (101.6mm) 9/16″ (14.29mm)
4 × 8 4.0″ (101.6mm) 1″ (25.4mm)
6 × 8 4.0″ (101.6mm) 9/16″ (14.29mm)
6 × 10 4.0″ (101.6mm) 1″ (25.4mm)
6 × 10S* 4.0″ (101.6mm) 9/16″ (14.29mm)
8 × 10 4.0″ (101.6mm) 9/16″ (14.29mm)
8 × 12 5.0″ (127.0mm) 1″(25.4mm)
8 × 12S* 5.0″ (127.0mm) 7/8″ (22.23mm)
10 × 14 5.0″ (127.0mm) 7/8″ (22.23mm)
10 × 16 5.0″ (127.0mm) 7/8″ (22.23mm)
12 × 16 5.0″ (127.0mm) 7/8″ (22.23mm)
All Multiple Segments*
(4″ Differentials)
6.25″ (158.75mm) 1″ (25.4mm)
All Multiple Segments*
(6″ Differentials)
6.25″ (158.75mm) 1 1/2″ (38.1mm)
* S indicates Somastic Coated Pipe
Model PE sized for nominal steel and IPS pipe.

order picture

Model PE – 2 Piece Casing Isolator/Spacer

Size
(Nominal ANSI)
Specification
Data
Approximate
Shipping Data
Carrier Minimum
Casing
Effective
Skid Height
Number Of
Segments
Per Unit
Number Of
Units Per Case
Per Unit Weights
In Pounds
Per Case
Cu. Ft.
3/4″ 2″ 5/16″ 2 10 .05 .09
1″ 3″ 1/2″ 2 10 .15 .13
1-1/4″ 3″ 1/2″ 2 10 .20 .14
1-1/2″ 3″ 1/2″ 2 10 .20 .18
2″ 4″ 5/8″ 2 10 .50 .34
2-1/2″ 5″ 5/8″ 2 10 .57 .51
3″ 6″ 5/8″ 2 10 .65 .47
4″ 6″ 9/16″ 2 10 .77 .34
4″ 8″ 1″ 2 10 1.00 .47
6″ 8″ 9/16″ 2 10 1.10 .74
6″ 10″ 1″ 2 10 1.65 .91
6″(S) 10″ 9/16″ 2 10 1.92 .91
8″ 10″ 9/16″ 2 10 1.45 .56
8″ 12″ 1″ 2 10 2.20 1.13
8″ (S) 12″ 7/8″ 2 10 2.29 1.13
10″ 14″ 7/8″ 2 10 2.37 1.35
10″ (S) 16″ 7/8″ 2 10 2.55 1.35
12″ 16″ 7/8″ 2 10 2.72 1.67
(S) means Somastic coated pipe

order picture

Model PE
Multi Segmented Casing Isolator/Spacer
For 4″ Carrier/Casing Differentials

Size
(Nominal ANSI)
Specification
Data
Approximate
Shipping Data
Carrier Minimum
Casing
Effective
Skid Height
Number Of
Segments
Per Unit
Number Of
Units Per Case
Per Unit Weights
In Pounds
Per Case
Cu. Ft.
Full LS4 Half LS2
12″(S) 18″ 1″ 3 1 10 4.50 2.64
14″ 18″ 1″ 3 1 10 4.50 2.64
16″ 20″ 1 4 10 5.00 2.98
18″ 22″ 1″ 4 1 10 5.75 3.31
20″ 24″ 1″ 5 10 6.25 3.65
22″ 26″ 1″ 5 1 10 7.00 3.95
24″ 28″ 1″ 6 10 7.50 4.33
26″ 30″ 1″ 6 1 10 8.25 4.67
28″ 32″ 1″ 7 10 8.75 5.01
30″ 34″ 1″ 7 1 10 9.50 5.34
32″ 36″ 1″ 8 10 10.00 5.63
34″ 38″ 1″ 8 1 10 10.75 5.97
36″ 40″ 1″ 9 10 11.25 6.30
38″ 42″ 1″ 9 1 10 12.00 6.64
40″ 44″ 1″ 10 10 12.50 6.98
42″ 46″ 1″ 10 1 10 13.25 7.32
44″ 48″ 1″ 11 10 13.75 7.66
46″ 50″ 1″ 11 1 10 14.50 7.99
48″ 52″ 1″ 12 10 15.00 8.33
(S) means Somastic coated pipe.

 

 

 

 

order picture

Model PE
Multi Segmented Casing Isolator/Spacer
For 6″ Carrier/Casing Differentials

Size
(Nominal ANSI)
Specification
Data
Approximate
Shipping Data
Carrier> Minimum
Casing
Effective
Skid Height
Number Of
Segments
Per Unit
Number Of
Units Per Case
Per Unit Weights
In Pounds
Per Case
Cu. Ft.
Full HS6 Half HS6A
14″ 20″ 1.5″ 3 1 10 4.50 2.64
16″ 22″ 1.5″ 4 10 5.00 2.98
18″ 24″ 1.5 4 1 10 5.75 3.31
20″ 26″ 1.5″ 5 10 6.25 3.65
22″ 28″ 1.5″ 5 1 10 7.00 3.95
24″ 30″ 1.5″ 6 10 7.50 4.33
26″ 32″ 1.5″ 6 1 10 8.25 4.67
28″ 34″ 1.5″ 7 10 8.75 5.01
30″ 36″ 1.5″ 7 1 10 9.50 5.34
32″ 38″ 1.5″ 8 10 10.00 5.63
34″ 40″ 1.5″ 8 1 10 10.75 5.97
36″ 42″ 1.5″ 9 10 11.25 6.30
38″ 44″ 1.5″ 9 1 10 12.00 6.64
40″ 46″ 1.5″ 10 10 12.50 6.98
42″ 48″ 1.5″ 10 1 10 13.25 7.32
44″ 50″ 1.5″ 11 10 13.75 7.66
46″ 52″ 1.5″ 11 1 10 14.50 7.99
48″ 54″ 1.5″ 12 10 15.00 8.33
(S) means Somastic coated pipe

Typical Specifications for Model HT Casing Spacers

Casing Isolator Specification

Casing isolators/spacers shall be PSI Model PE molded from high density polyethylene plastic in two segments for applications on carrier pipe diameters of 12″ and under. Model PE isolator/spacers will be provided in multiple segments for applications on carrier pipe diameters of over 12″. Each spacer segment shall be a solid, non-welded molded piece designed for accommodating a specific size carrier pipe O.D.

Each casing spacer shall be manufactured at a facility that has a Registered ISO 9001:2000 Quality Management System. A copy of the current ISO 9001:2000 registration shall be provided with material submittal.

Approved manufacturer: Pipeline Seal and Insulator, Inc.

End Seal Specification

After insertion of the carrier pipe in the casing, the ends of the casing shall be closed by installing a PSI Model “C”, Model “S” or Model “FW” casing end seal as manufactured by Pipeline Seal and Insulator, Inc., Houston, TX.

Link-Seal® End Seal Specification

(Carrier Pipe Must Centered Within Casing)

After insertion of the carrier pipe in the casing, the ends of the casing shall be closed by installing the Link-Seal® end seals and a 1/8″ thick synthetic rubber end seal equal to the PSI Model “C” end seal. Both as manufactured by Pipeline Seal and Insulator, Inc., Houston, TX.

Disclaimer

The foregoing performance data is intended as guideline material only and is based on assumptions of general and reasonable use. Performance suitability for any specific application should be determined by the user.

PDF Documents for Download

Engineering Manual Cover

Casing Spacer and End Seals Engineering Manual and Buyers Guide

PSI Model PE Casing Spacers

PSI Model PE Casing Spacers

Learn About Our Services

Learn about our

pipeline integrity

Services

Learn about our

cathodic protection

Engineering Services

Learn about our

A/C Mitigation

Engineering Services

Learn about our

field services

Learn about our

surveying services