Selected:

Lida® Rod Anodes

Lida® Rod Anodes

Providing High Current Outputs With a Low Coating Wear Rate

LIDA® Rod Anodes are comprised of a titanium substrate with a mixed metal oxide coating. The mixed metal oxide is a crystalline, electrically-conductive coating that activates the titanium and enables it to function as an anode.

Rod Anode Applications

  • Process Vessels
  • Water Condensor Boxes
  • Heat Exchangers
  • Water Intake Structures

BENEFITS

  • Lower Cost Per Ampere Year
  • Constant Electrical Resistance
  • No Hassles

FEATURES

  • High Current Output
  • Low Coating Wear Rate
  • Five Year Product Warranty
  • Also available as Rod Anode Assemblies

Anode coating may be selected to match freshwater, brackish water, seawater, coke, or sand environments. De Nora LIDA® Rod anodes are available in the following standard sizes: 

–  1/8″ x 4′      

–  1/4″ x 4′    

–  1/2″ x 4′     

–  3/4″ x 4′

Anode Life Projections

Due to the extremely low consumption rates and dimensional stability of mixed metal oxide anodes, the electrical resistance of LIDA® Rod Anodes remain essentially constant with time. The high current density capacity of De Nora mixed metal oxide anodes has the added advantage of allowing high current overloads for initial polarization without causing harm to the anode.

Operating Environment

Selection of the anode coating is based on operating environment:
FW Freshwater or Brackish Water
SWT Seawater

Standard Rod Anode Assemblies

Freshwater or Brackish Water
Sea Water Environments
Part Number
FA-ROD 0.5FW FA-ROD 0.75FW
FA-ROD 0.5SW FA-ROD 0.75SW
Max. Current Output
1.6amps 2.4 amps
1.6amps 2.4 amps
Rod Diameter
0.5 inch (1.27 cm) 0.75 inch (1.91 cm)
0.5 inch (1.27 cm) 0.75 inch (1.91 cm)
Total Length
24 inch (61 cm) 24 inch (61 cm)
24 inch (61 cm) 24 inch (61 cm)
Active Length Max-User Specified
16 inch (41 cm) 16 inch (41 cm)
16 inch (41 cm) 16 inch (41 cm)
FRP Length
6 inch (15 cm) 6 inch (15 cm)
6 inch (15 cm) 6 inch (15 cm)
Maximum Water Velocity
2ft/sec (.6 M/sec) 5ft/sec (1.5 M/sec)
2ft/sec (.6 M/sec) 5ft/sec ( 1.5 M/sec)

All De Nora Lida® Anodes

Disk Anode on the GroundDisk Anode on the Ground
Lida® Disk Anodes
Dam and Navigation Lock Gates
Marine Structures, Water Tanks, Vessels
Fresh, Brackish and Seawater Environments
Titanium Disk with MMO Coating
Construction of an underground pipelineConstruction of an underground pipeline
Lida® One Anodes
Cathodic Protection of Buried Structures
Varying Soil Resistivities
Carbonaceous Backfill
Titanium Tube with MMO Coating
LIDA® rod anodes comprised of a titanium substrate with a mixed metal oxide coatingLIDA® rod anodes comprised of a titanium substrate with a mixed metal oxide coating
Lida® Rod Anodes
Process Vessels, Water Condensor Boxes, Heat Exchangers, Water Intake Structures
Constant Electrical Resistance over time
Fresh Water, Brackish Water, Seawater, Coke or Sand Environments
High Current Density Capacity
Offshore StructureOffshore Structure
Lida® TSA™ Anodes
Deep Water Applications
Easy Installation
close-up of wire anodesclose-up of wire anodes
Lida® Wire Anodes
Canistered Anodes, Groundbeds, Storage Tanks, Cable Shielding, Water Treatment Equipment
Not Affected by Chlorine Generation
High Chemical Stability
denora-bluedenora-blue
De Nora Lida® Anodes
Titanium Base with MMO Coating
High Chemical Stability, even in low pH Environments
Chlorine-Resistant Wire Lead

Lida® Rod Anodes

3 Rod Anodes of Varying Sizes

Required Information for RFQ:

Additional information

Share on facebook
Share on linkedin

Additional information

Share on facebook
Share on linkedin
Close Menu
×

Cart

Your Browser is Outdated

Older browsers may not support all the features used on this website. Please consider updating your browser for more security, speed and the best experience on this site.

Didn't find what you were looking for?

Help us improve the site for future visitors. Click on the reason you’re leaving.