CellularRTU & CPi

ScadaNet Products
	RMUvi P2S Test Point Monitor CellularRMU CellularRTU & CPi

CellularRTU, General Purpose Remote Monitoring Description The CellularRTU-5 can monitor four channels of analog or digital information, including voltage, current, potential, as well as any other parameter such as flow, level, or temperature. Modular A/D interfaces can program the device to monitor any input from high-impedance, millivolt level potentials up to 300 volts. A built-in LCD panel and user keypad allows basic control and user setup without a laptop computer. Channel thresholds and behavior, and a wide selection of user programmable functions are accomplished from a Windows-based laptop utility, ConfigRTUTM.
RTU-5 Highlights Four Analog or Digital Channels Battery Backup, AC Power Alarm Monitor Relay Output General Purpose Wireless Monitor Cellemetry or Microburst Communications
CPi, Rectifier Monitoring Description The CPi is designed for simple, low-cost, rectifier monitoring. Voltage and Current inputs are read and compared to user-established alarm set points at a variety of specific times and intervals ranging from minutes to months. Readings are evaluated against user-programmed high and low set points, and alarm violations can be immediately communicated across the wireless network, triggering user-assigned email, fax, and pager alerts. An embedded configuration utility allows the unit to be setup in minutes, using any PDA or laptop computer browser.
CPi Highlights Voltage, Current, and Meter Interface Battery Backup, AC Power Alarm Monitor Embedded Server Configuration App Self-contained NEMA 4 Enclosure

For more information, please contact us.