Allied Corrosion Industries, Inc. - Cathodic Protection & Corrosion Control Materials: Mastics, Tapes and Coatings

Mastics, Tapes and Coatings

Allied Corrosion, Inc. is a reseller of high-quality mastics, tapes and coating materials for industry. Product lines include:

Kendall-Polyken
Tuff-N-Nuff Industries
Central STACwrap

Polyken Kendall-Polyken is the leader in pipeline protection technology. The Polyken® brand has been synonymous with pipeline corrosion protection systems worldwide for more than 50 years. Whether in the extreme heat of the Middle East or the forbidding cold of Russia or the more moderate climates of the United States, Kendall-Polyken is there with the most advanced anti-corrosion pipeline coatings for the oil, gas, water and coal slurry industries. Kendall-Polyken offers a wide range of coating systems that meet the rigorous demands of on-land and off-shore pipelines, for both new construction and reconditioning of existing pipelines.

Tuff n Nuff logo

Tuff n Nuff Tuff-N-Nuff's Rockshield provides maximum impact protection for pipelines. Tuff-N-Nuff is 1/4" and 3/8 " thick P.V.C. strand extruded pads with excellent compressive and impact strength. Lightweight, flexible pads or rolls are easy to transport and quick to install. Pads or rolls are custom cut to fit your pipe sizes for circumference and cigarette wrap installations. Tuff-N-Nuff Rockshield provides a very cost-efficient, durable pipeline protection.

STACwrap is used for long-life corrosion protection, and the sealing and waterproofing of atmospheric, buried and submerged metal surfaces. The high degree of conformability of STACwrap allows for application over irregular surface profiles.

Sample joint

COMPOSITION: Non-woven, stitch-bonded, synthetic fabric carrier; fully saturated and coated with a neutral petrolatum compound blended with inert fillers and corrosion inhibitors.

CHARACTERISTICS: Stable in composition and plasticity over a wide temperature range. Non-hardening and non-cracking. Accomodates vibrations and extreme movement of the substrate. Highly dielectric strength.

FEATURES:

Non-flammable
Non-toxic
Contains no V.O.C.'s
Less costly than competitive products
Uses petrolatum rather than poor performing plasticizers
Installs in wet conditions - no rain outs!
Great for in-plant piping - no down time!
Encapsulation of lead paint
Install over any coated or painted surface
Minimal surface preparation
No special tools required
No cleanup - no curing time!

TECHNICAL PROPERTIES Meets ANSI/AWWA C217-90 Standard
Tensile strength	45 lbf/in min
Water vapor permeability (ASTM D 1653-85)	0.00035 perms
Cathodic disbondment (ASTM G-8)	1.2 mm avg.
Breakdown voltage	16kV min with 55% overlap
Mass	0.294 lb/sq ft average
Application temperature range	23^oF to 165^oF
Service temperature range	-270^oF to 165^oF
Thickness	55 mils (1.4 mm) avg.
Length	33 ft roll
Widths	2", 3", 4", 6", 8", 12"
Packaging	72" x 33'/case

Allied Corrosion's engineering staff can work with you to determine which products are best suited to your specific application.